Know going in If you get the Envirosteamer, know that, though it cleans the best, the first two times you use it the water goes through holes faster than it will in subsequent uses, so it will go through steam faster and your floors will be wetter than normal. Enough people wrote me to know this happened the first one or two times as it did my first time of use,then after that the mop was normal, our floors are greatand it lasts waaaah longer. We don't know why.Just know that going in.After the first two initializing uses it steams perfect! Also obviously the steam lasts longest if you don't hold the mop above the floor to walk to another area since the steam pours out as it will with any steam mop if you do.
(update: This review was updated on 11-2-09 after I got to compare the Bissell as well as add notes about the Ladybugg steamer at the bottom, and then on 11-30 when I got to compare the SteamFast SF-140 and on 12-7 to compare the Steam Boy)
I live in a neighborhood where EVERY home is "green built certified" this means that, to have that certification, the builder built no homes with carpet. All the main floors are polished concrete and the upper floors wood. The bathrooms all have tile and/or slate in every home.
Because of this, as you could imagine, steam mops are quite the neccessity...not only because they get the hard surfaces better than anything else, but because they are also "green" and clean chemical free. I'll be honest, for us...that's a bonus but we weren't cleaning chemical free before. We like chemical free for our pet's paws but I'll confess I was mopping with chemicals before I got my steamer and just kept the pets out of the room while doing it because, up until then, I couldn't get it clean any other way.
Okay, so that said...we decided to have a steamer show down to compare 7 different steamers because my friends and I knew as long as we are in these homes we are gonna have to have a steamer to get all these hard floors clean...we may as well figure out which one to buy next go round. Because my own home is graced with 2 cats, 3 dogs, and two gregarious cooks, my kitchen floor (which had not ever been cleaned by a steamer since my steamer had just arrived) was the testing spot.
Mind you, I vaccuum twice per week and do a mega mop twice a week. I THOUGHT I had pretty clean floors in spite of my pet capacity.
I thought wrong. These picked up dirt so well it's scary
So here's the results:
1. steam mops are the mac daddys of clean floors. What these things picked up was tremendous and no comparison to my vigorous prior constant major mopping.
2. So now I'll break down the elements of each mop we used and then go into more detail about each at the end.
We tried out:
"S": The shark by Europro
"E" The Envirosteamer by Eureka
"H" the haan steamer
"M" the Monster
"B" The Bissell Green Tea
"SF" The SteamFast SF-140 by SteamFast
"SB" The SteamBoy T1
CORD LENGTH: so you don't have to stop and unplug and replug in somewhere else:
Shark ( will be referred to as S):20 feet
Envirosteamer (will be referred to as E): 25 feet *Note* The Envirosteamer has a clip at the top of the handle to keep the cord out of the way. When it's plugged in and you need more cord length, a light tug undoes this cord on the clip so that you have the full 25' of cord. Otherwise it's only around 20 feet. It's made to do this.
Haan: (will be referred to as H)19'8"
Monster (will be referred to as M): 25 feet
Bissell (will be referred to as B) 17 feet
SteamFast (will be referred to as SF): 18.7 ft.
SteamBoy (will be referred to as SB): 16 ft.
STEAM TEMPERATURE: this is a primary element. The hotter the steam, the more dirt picked up and hot steam will also kill parasites, mold and mildew and loosen more dirt:
S 110 degrees. lame
E 220 degrees. very hot
H 212 degrees. very hot
M 266 degrees. hottest...although the envirosteamer and haan seemed plenty hot enough. The shark didn't clean nearly as well and this was one reason. 110 degrees just isn't going to melt off stuck on grime.
B 125 degrees. Note that, because of this low steam temperature the manual said that if I wanted to sanitize the floor or pick up caked on spills, I had to hold the steamer on the spot for 15 seconds but no more than 20 because that could damage some floors. Now I don't know about you, but if I can sanitize with one swipe of the other steamers because of their sanitizing temps my floor will be done WAY faster but I don't have a timer to worry about the extra 5 secons where my wood floors could get damaged. My sink water is hotter than this so it would take less time to use a regular mop if I have to hold the steamer on every spot of my floor for 15 seconds to santize. Just sayin
SF: 137 degrees. Not hot enough to clean well nor sanitize.
SB: 120 degrees. Not hot enough to clean well nor sanitize
BUILD:
We found how it was made corresponded with issues with the steamer. The Shark, for example, was quite flimsy and they actually sell replacement handle kits because so many people have issues with the handle breaking! We know this because my neighbor's shark broke and the store had a replacement handle kit on the shelf because he said "it happens often". That's an extra cost.
Envirosteamer: Was 5.4 lbs which made it lightweight but strong enough that you didn't have to press down to clean. Very well made and strong parts
Haan: not made as well as the envirosteamer but it's more expensive so this was a surprise. A bit flimsy and you need to press down on it more to clean at 3.15 lbs.
Monster: hefty and well made at 9 lbs but a bit too heavy unless you want a good workout. (Note: They have changed the Monster handles on the mops now and they are all plastic and people are having breakage issues)
Bissell: It's 8.4 pounds but that includes a water filter that you have to get for this one (see notes below)
SteamFast: very flimsy plastic all over, but it's also more affordable than the other mops so it's a bit of a trade off. 7 lbs.
SteamBoy: They didn't even ship this preassembled like the other mops. We had to assemble it! Pretty flimsy plastic. 9 lbs but that includes the water filter you have to get with this one (see notes below)
WATER CAPACITY: Very important because having to stop and add more water just adds on to the time you have to spend cleaning, especially if you are cleaning a hallway or livingroom or some other area that has no sink:
S: only holds up to 10 oz of water. Lasted for 10 miinutes of cleaning
E: holds up to 20 oz. of water. Lasted for over 20 minutes of cleaning (we stopped at 20 and it was still going)
H: holds up to 11.83 oz of water. Lasted for 13 minutes of cleaning
M: holds up to 17 oz. of water. Lasted for 15 minutes of cleaning
B: holds up to 13 oz of water, lasted for 12.5 minutes of cleaning AND you have to undo and remove the tank from the machine every time you fill it up then hook it back on and the steam tank is on the handle rather than the base so the steam doesn't flow directly out after heating up which may explain why it's not as hot once it leaves the machine. The way this mop is made the water flows past heating elements which can, according to Bissell, develop calcium deposits on it so this is the only mop where, because of this, you also have to use a water filter with it and replace the water filter when there is build up which means and extra 12 bucks every few months. The better mops are made to heat the water in a metal tank so this is not an issue and you pour the water directly into the tank.
SF: Holds the least amount of water and I had to stop and fill up and get the water reheated often in trying to clean the floor. Only holds 8 oz of water and if you use 8 oz it gets your floor too wet so we wound up filling it with just up to 7.5 oz of water for best results and it only lasted 7 minutes when we did that before we had to refill again.
SB: up to 24 oz BUT it only lasted for 12 minutes of cleaning. I think because of the build. This one also is made so that the water has to flow past heating elements down the handle, rather than flowing directly from a hot tank to the floor at the base. Because of this it can develop calcium deposits inside the mop so you have to also buy a water filter for this mop and replace it every few months when there is build up which means extra cost and, quite possibly, more repairs. Because this does not flow directly out of a hot tank it cools on the way down and possibly with this one evaporates somehow because we tried it twice and the steam simply didn't last as long as it should.
STEAM HOLES: We found a difference although you'd think they'd all be the same. The shark only had one hole that the steam came out of so it wasn't cleaning things on the edges, just in one spot. All the others had steam coming from bottom and sides. Steamboy also didn't have holes near the edge
SIZE: The taller it is the less stooping, the wider the mop head, the more it covers
S: 40"Hx12"Wx7"D
E: 50"Hx13.25"Wx6.75"D (the fact that this depth was smaller made it reach under applicances better...it fit better under things)
H: 50.5x11.5x7.5
M: 48x12.7.5
B: 45.25H (this was uncomfortably short) x11 x8.4 (even though this didn't fit under cabinets because of the depth it did swivel the best)
SF:49x11.8x7
SB: 28.2x6.9x7.9
Conclusion of comparison: First it must be pointed out that, in order to use the shark and the Bissell and the SteamBoy, you had to keep pumping the water...Read more›
Click Here to see more reviews about:
Eureka 313A Enviro Hard-Surface Floor SteamerProduct Description: Designed for use on wood, granite, laminate, marble, and other hard, sealed surfaces, this sleek steamer quickly and effectively sanitizes floors to gleaming perfection. The compact unit's ingenious steaming technology requires no harsh chemicals, instead harnessing the power of pure steam to loosen and remove even the toughest dirt and grime. Furthermore, its generous 12-1/2-inch cleaning head maneuvers easily into corners and reduces the time it takes to cover even large floor surfaces, while its 25-foot cord allows for hassle-free access all over a home, condo, or apartment. Best of all, the steamer weighs only 5-1/2 pounds empty--no more lugging cumbersome wet/dry vacs or mops and buckets around to get the job done. Additional highlights include a simple on/off switch, 6-1/2 amps of power, an indicator light for water levels, an adjustable-height handle, a preheating/cool-down tray for safety, and a cloth clip. A measuring cup, funnel, and two Magic Cloth steam pads come included (additional replacement pads available separately). The steamer measures 7 by 12-1/2 by 49 inches and carries a one-year limited warranty.
Buy cheap Eureka 313A Enviro Hard-Surface Floor Steamer now Get 7% OFF
This Replacement filter works perfectly on my Honeywell HCM-6000. I found that the filter will last longer if you flip it every other water fill up. This will not allow any one side to stay in the water too long and turn sour.
